iCallDroid spot
iCallDroid spot
June 9, 2016
IPC120
IPC120
June 9, 2016
Show all
IPC100_4ef97cc79b863

IPC100


Description

IPC100 is the industry 1st embedded asterisk® motherboard and works with Mini PCI cards to provide FXO/FXS and/or BRI interfaces.

OpenVox IPC100 motherboards are small form (15cm*15cm) factor system boards optimized for IPPBX and network security applications. The Fanless design, as low as 6W normal power, enables more reliability to the system and ability to operate in harsh industrial environments. Integrated up to 3 Ethernet ports, the IPC100 motherboards provide a flexible choice for different applications to the users.

With OpenVox Mini PCI cards, SMB can easily have their phone systems built with IPC100. Installed two OpenVox B400M cards with IPC100, users can have up to 100 concurrent calls in one single system.

IPC100 works with Asterisk®, Askozia®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™, pfSense and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Firewall, Switch, IVR, and VoIP gateway applications.

Technical Specifications

  • CPU: Intel Atom Z510P 1.1GHz/ Z520P 1.3GHz /Z530P 1.6GHz
  • DRAM: Slot Onboard, support up to 2GB DDR2 SDRAM (double side 1GB)
  • Chipset: Intel Poulsbo
  • South Bridge: Poulsbo integrated
  • Storage: Compact Flash socket
  • 44pin PATA connector
  • 1 SATA slot (only available at Power in DC12V)
  • Power: DC jack, 7V to 20V, Suggest 12V supply,Center pin =positive, sleeve = ground, 2.1 mm diameter
  • Three front panel LEDs, for 3 programmable GPO status indicator
  • Push button: For mode setting switch, Accessing a programmable GPI, Active low means switch is pressed
  • Expansion: 2 Mini PCI slot, fixed and individual interrupt (under Centos5.3 5.4)
  • Connectivity: Up to 3 Ethernet channels (10/100Mbps speed)
  • 2 PCI Ethernet controllers
  • 1 PCI-E Ethernet controller (can be configured as a Giga-bit LAN at Factory)
  • Fixed and individual interrupt (under Centos5.3 5.4)
  • Support PXE (for remote boot)
  • I/O: 1*DB9 serial port, for debug console usage, RS232
  • 2*USB 2.0 port
  • Board size: 6 x 6″ (152.4 x 152.4 mm)
  • Temperature: 0°C to 60°C (contact factory for more temp. options)
  • Firmware: AMI BIOS
  • PCB layer: 8
  • Power dissipation: ~6W

Certifications

  • RoHS Complaint
  • Certificates: FCC and CE
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “IPC100”